Outdoor Warming Drawers
Keep plates, cups and finished food warm until you serve. The Sunstone 30" warming drawer runs on 110 volts, sets the heat up to 220°F with digital controls, and fits Sunstone single and double warming drawer cabinets.
Warm Plates and Food Until You Serve
The Sunstone 30" Electrical Warming Drawer (SAP30WDPRO) keeps plates, cups and finished food warm until you serve. It runs on 110 volts and is UL-certified for indoor kitchens or protected outdoor kitchens.
Digital controls with a temperature display and up and down buttons set the heat up to 220°F. A red indicator light stays visible even with the drawer closed, so you can tell at a glance whether the unit is on. The drawer itself is large and food-safe, with a weather sealed system, and it has more interior width than many knob-controlled warmers.
- Digital display with up and down control
- Heat up to 220°F
- Red indicator light visible with the drawer closed
- Large food-safe drawer with a weather sealed system
- 110 volt, UL-certified
- Stackable, with an upgradable face panel
SAP30WDPRO Specifications
| Specification |  SAP30WDPRO |
|---|---|
| Dimensions | 30" W × 21" D × 11-1/2" H |
| Cut-out | 28-1/2" W × 23-1/4" D × 10" H |
| Voltage | 110 volt, UL-certified |
| Controls | Digital display with up and down control |
| Temperature | Up to 220°F |
| Indicator | Red light, visible with the drawer closed |
| Design | Stackable, upgradable face panel |
Dimensions
- SAP30WDPRO
- 30" W × 21" D × 11-1/2" H
Cut-out
- SAP30WDPRO
- 28-1/2" W × 23-1/4" D × 10" H
Voltage
- SAP30WDPRO
- 110 volt, UL-certified
Controls
- SAP30WDPRO
- Digital display with up and down control
Temperature
- SAP30WDPRO
- Up to 220°F
Indicator
- SAP30WDPRO
- Red light, visible with the drawer closed
Design
- SAP30WDPRO
- Stackable, upgradable face panel
Single or Double Warming Drawer Cabinets
Sunstone's 34" warming drawer cabinets hold the drawer in a 304 stainless steel sleeve with a 1-gang electrical box included, so wiring is straightforward. The sleeve fits most 30" warming drawers with an appliance cut-out up to 28-1/2" W x 10" H and up to 23" deep.
The single cabinet (SAC34SWC) adds a large bottom drawer for extra storage and a large condiment bin drawer; the bins can be swapped in and out with the warming drawer. The double cabinet (SAC34DWC) holds two warming drawers.
- Fits most 30" warming drawers, including the SAP30WDPRO
- Appliance cut-out up to 28-1/2" W x 10" H, up to 23" deep
- 1-gang electrical box included
- 304 stainless steel, ships fully assembled
- Sunstone Pin-Lock installation
- 4 adjustable peg-legs, front and back kick-plates included
Warming Drawer Cabinets
Single and double warming-drawer cabinets come with peg legs, rod handles, front and back kick plates, and utility access ports for an easy install.
Warming Drawers in a Sunstone Island
Match the Drawer Face to Your Kitchen
The Sunstone Designer Face Panel Handle Upgrade for 30" Warming Drawer (SAP30WDDE) replaces the front panel and handle on an existing warming drawer so it matches Sunstone Designer Series appliances, grills, door fronts and cabinets.
It is 304 stainless steel with matching face finishes. The kit includes all the panel and handle components and hardware, and it fits all standard 30" Sunstone warming drawers.
